www.squinch.org


AGA3 With AGA8 Detail

This page does the AGA 3 and the AGA 8 calculations together. It takes meter settings, component mole fractions, a differential pressure, static pressure and temperature, and calculates base volume, base volume flow rate or volume correction factor.  It requires flowing and base pressure and temperature.

AGA3:  Enter a flowing temperature, pressure and component mole fractions, a base temperature, pressure, a flowing volume and a meter factor, then press Calculate. 
Value Input SI units US units
Units ? SI    US SI
US
C1 Mole % =
C2 Mole % =
C3 Mole % =
iC4 Mole % =
nC4 Mole % =
iC5 Mole % =
nC5 Mole % =
C6 Mole % =
C7 Mole % =
C8 Mole % =
C9 Mole % =
C10 Mole % =
N2 Mole % =
CO2 Mole % =
H2S Mole % =
CO Mole % =
H2 Mole % =
O2 Mole % =
H2O Mole % =
He Mole % =
Ar Mole % =
Diff Press = kPa in WC @ 60F
Flowing Pressure = kPaA PSIA
Flowing Temp = Deg C Deg F
Downstream Pressure Tap?

Orifice diameter = mm in
Pipe diameter = mm in
Ideal specific gravity = - -
Base Pressure = kPaA PSIA
Base Temp = Deg C Deg F
Orifice diameter temp = Deg C Deg F
Orifice therm exp. coeff. = mm/(mm Deg C) in/(in Deg F)
Pipe diameter temp = Deg C Deg F
Pipe therm exp. coeff. = mm/(mm Deg C) in/(in Deg F)



Results Table